Home  Email Contact Call us at: 1-218-436-7000

Mattrack_logo Mattracks Equipped vehicles - Photo
 
200 Series Specifications
Home > Products by Model > 200 Series > Specifications 200M1 A1 >

200 Series Model

200 spec page1

200 Model Series Specifications Chart

For printable PDF file like the image below “Click” on the image below.

200 spec link

Model

200-M1-A1

Exclusive Anti-Torque System

Front Rubber Torsion - Anti Torque, Rear Air Ride (adjustable)

Frame Construction

Steel

Assembly Weight

3,390 lbs. @ Front 495 lbs. ea. / Rear 1200 lbs. ea.
(1,538 kg @ Front 225 kg ea./ Rear 544 kg ea.)

Type of Vehicle***

Heavy Duty 4x4 Vehicles

Recommended Max. Gross Wt.*

21,000 lbs. (9,525 kg) GVW,
Max Ft. 7,500 lbs. (3,400 kg), Max Rr. 13,500 lbs. (6,125 kg)

Internal Suspension

Concentric Pivot w/ Independent Rocker Arm, Oscillating - Front and Rear
(with air ride chassis supported concentric pivot suspension -Rear)
(Smooth ride with minimum change to track tension, resulting in minimal heat buildup)

Track Tread Width

18 in. (457 mm)

Tread Style

All-Terrain, Self-Cleaning Lug, Quiet, Highly Efficient

Track Material

Specially Formulated Rubber Compound with Internal Reinforced Composites

Overall Width” (Outside to outside of tracks)

90 in. to 96 in. (2,285 mm to 2,435 mm)

Recommended Operating Temperature

(Ambient) -38F to +130 F (-40C to +55C)

Overall Width Increase from Standard*

15 in. to 20 in. (380 mm to 510 mm)

Increase Ground Clearance*

1-1/2 in. to 6 in. (40 mm to 150 mm)
Mattracks Position Vehicle Over Axle Center @ 20.75 in. (527 mm)

Lowers Roll Center

1-1/2 in. to 2-1/2 in. (40 mm to 60 mm)

Ground Contact Length:

(Hard Surface)  Front 41 in. / Rear 61 in. (Front 1,040 mm / Rear 1,550 mm)

(Soft Surface)  Front 63 in. / Rear 95 in. (Front 1,600 mm / Rear 2,410 mm)

Ground Contact Surface Area

3,636 sq. in. min. (23,650 sq. cm. min.)
5,688 sq. in. max. (36,650 sq. cm. max.)

Ground Pressure

1.4 to 4 psi (9.6 to 27.6 kPa)

Gear-Reduction

1/3 Increase in Gear Reduction on Vehicle with 30 in. Standard Tire

Sprocket Diameter

22 in. (560 mm)

Wheels (Double Shielded & Sealed Bearing)

8 in. x 2.25 in. HD extra seals (14 Front, 20 Rear /corner, 3 rows)

Wheel Material

UHMWand Rubber

Paint (color)

Yellow-Standard
Optional: Other Colors, E Coat PERFORMANCE Corrosion, Resistance

Recommended Max. Speed**

40 mph (64 km/h)

Turning Radius

Same as original vehicle

Approach Angle*

Up to 90

Departure Angle*

Up to 80

Grade Capacity*

100%

Side Slope Capacity

68%

Maximum Operating Side Sope (Grade)*

25%

Terrain - All Terrain Including Hard Surface

@ 21,000 lbs. (9,525 kg) GVW

Maximum Distance Off Road

Indefinite

Maximum Distance Hard Surface**

@ Below 80F (26C) slower speeds and light GVW: indefinite
@Above 80F (26C) and light GVW: 15 miles @ 40 mph (64 km/h)
@Above 80F (26C)@ GVW: 5 mile @ 40 mph (64 km/h)

NOTE: Some trimming of vehicle body parts may be required. Requires additional time and complexity for installation compared to standard Mattracks Models. Vehicle may require optional Steering Assist kit or upgraded power steering.

*Depending on vehicle **For maximum tread life

***Some vehicles may require slight alterations.

ALL SPECIFICATIONS ARE APPROXIMATE, YOUR VEHICLEʼS PERFORMANCE MAY DIFFER. WE RESERVE THE RIGHT TO MAKE CHANGES OR MODIFICATIONS WITHOUT NOTIFICATION

[Home] [Products by Model] [200 Series] [175 Series] [150 Series] [105 Series] [88 Series Model] [Track-Tor-Assist] [Trail-R-Mates] [ATV Tracks] [Custom  Engineered] [Select Tracks by Vehicle] [Galleries  and Video] [Contact  Mattracks] [About  Mattracks]
© Copyright 2010 - Mattracks, Inc.
202 Cleveland Ave. East P.O. Box 214 Karlstad, MN 56732
Phone 218-436-7000 FAX 218-436-7500