Model

Trail-R-Mate with Pneumatic Option

Assembly Weight

930 lbs. per pair at 465 lbs. each (420 kg at 210 kg each)

Frame Construction

Structural Steel

Recommended Max. Gross Wt.*

8,000 lbs. (3,630 kg) GVW per pair

Axle Hub Bolt Pattern

Combination 6 Bolt on 6 in. (152 mm)
8 Bolt on 8 in. (203 mm) [Other Patterns Optional]

Internal Suspension

Concentric Pivot with Air Ride Pneumatic

Track Tread Width

16 in. (406 mm)

Tread Style

All-Terrain Self-Cleaning Lug

Track Material

Rubber with Internal Composite Rods/Cord

Recommended Operating Temperature

(Ambient) -38F to +130 F (-40C to +55C)

Overall Width Increase from Standard*

0 in. to 14 in. (0 mm to 355 mm)

Increase Ground Clearance*

0 in. or less (0 mm or less)

Mattracks Position Vehicle Over Axle Center

at 15 in. (380 mm)

Total Length:

52 in. (1,320 mm)

Total Height:

22 in. (560 mm)

Offset (Bolt Plate to inside of track)

5 1/2 in. (140 mm)

Ground Contact Length:

(Hard Surface) 36 in. min. (915 mm min.)

(Soft Surface) 51 in. max. (1,295 mm max.)

Ground Contact Surface Area

1,152 sq, in. min. (7,420 sq. cm min.) per pair

1,632 sq. in. max. (10,500 sq. cm max.) per pair

Ground Pressure

1.0 to 5.0 psi (6.9 to 34.5 kPa) (.007 to .034 Nmm²)

End Wheel Diameter

19.5 in. (495 mm) [4 per corner]

Idler Wheels (Double Shielded & Sealed Bearing)

8 in. x 2.5 in. HD Extra Seals (2/corner, 2 rows)

Idler Wheel Material

UHMW & Rubber

Paint (color)

Red - Standard (Other colors - “Optional” - E Coat Corrosion Resistance)

Recommended Max. Speed**

40 mph (64 km/h)

Turning Radius

Same as original vehicle

Approach Angle*

Up to 90˚

Departure Angle*

Up to 80˚

Grade Capacity*

100%

Side Slope Capacity

68%

Maximum Operating Side Sope (Grade)*

25%

Terrain - All Terrain Including Hard Surface

at 8,000 lbs. (3,360 kg) GVW

Maximum Distance Off Road

Indefinite

Maximum Distance Hard Surface**

at below 80˚F( 26°C) Indefinite

at above 80˚F (26°C): 15 miles at 40 mph (22 km at 64 km/h)