200M1-A1
Ideal for use on commercial vehicles, designed for heavy loads and smooth rides. The key features of the Model 200 track conversion system include; the all new highly-efficient 18 inch wide rubber track, the Mattracks exclusive, patented rubber torsion, anti-torque system and the air-ride chassis supported concentric pivot suspension.
Mattracks Model 200 series track conversion system adds versatility to commercial and industrial specialty vehicles such as drilling rigs, aerial devices and service trucks.
SPECIFICATIONS
| MODEL | 200M1-A1 |
| EXCLUSIVE ANTI-TORQUE SYSTEM | Front rubber Torsion - Anti-Torque, Rear Air Ride (adjustable) |
| FRAME CONSTRUCTION | Steel |
| ASSEMBLY WEIGHT | 3,390 lbs. @ Front 495 lbs. ea. / Rear 1200 lbs. ea. |
| (1,538 kg @ Front 225 kg ea. / Rear 544 kg ea.) | |
| TYPE OF VEHICLE*** | Heavy Duty 4x4 Vehicles |
| RECOMMENDED MAX. GROSS WT.* | 21,000 lbs. (9,525 kg) GVW, |
| Max Ft. 7,500 lbs. (3,400 kg), Max Rr. 13,500 lbs. (6,125 kg) | |
| INTERNAL SUSPENSION | Concentric Pivot w/ Independent Rocker Arm, Oscillating - Front and Rear |
| (with air ride chassis supported concentric pivot suspension - Rear) | |
| (Smooth ride with minimum change to track tension, resulting in minimal heat buildup) | |
| TRACK TREAD WIDTH | 18 in. (457 mm) |
| TREAD STYLE | All-Terrain, Self-Cleaning Lug, Quiet, Highly Efficient |
| TRACK MATERIAL | Specially Formulated Rubber Compound with Internal Reinforced Composites |
| OVERALL WIDTH (Outside to Outside of tracks) | 90 in. to 96 in. (2,285 mm to 2,435 mm) |
| RECOMMENDED OPERATING TEMPERATURE | (Ambient) -38°F to +130°F (-40°C to +55°C) |
| OVERALL WIDTH INCREASE FROM STANDARD* | 15 in. to 20 in. (380 mm to 510 mm) |
| INCREASE GROUND CLEARANCE* | 1-1/2 in. to 6 in. (40 mm to 150 mm) |
| Mattracks Position Vehicle Over Axle Center @ 20.75 in. (527 mm) | |
| LOWERS ROLL CENTER | 1-1/2 in. to 2-1/2 in. (40 mm to 60 mm) |
| GROUND CONTACT LENGTH | (Hard Surface) Front 41 in. / Rear 61 in. (Front 1,040 mm / Rear 1,550 mm) |
| (Soft Surface) Front 63 in. / Rear 95 in. (Front 1,600 mm / Rear 2,410 mm) | |
| GROUND CONTACT SURFACE AREA | 3,636 sq. in. min. (23,650 sq. cm. min.) |
| 5,688 sq. in. max. (36,650 sq. cm. max.) | |
| GROUND PRESSURE | 1.4 to 4 psi (9.6 to 27.6 kPa) |
| GEAR-REDUCTION | 1/3 Increase in Gear Reduction on Vehicle with 30 in. Standard Tire |
| SPROCKET DIAMETER | 22 in. (560 mm) |
| WHEELS (Double Shielded & Sealed Bearing) | 8 in. x 2.25 in. HD extra seals (14 Front, 20 Rear / corner, 3 rows) |
| WHEEL MATERIAL | UHMWand Rubber |
| PAINT (color) | Yellow-Standard |
| Optional: Other Colors, E Coat PERFORMANCE Corrosion, Resistance | |
| RECOMMENDED MAX. SPEED** | 40 mph (64 km/h) |
| TURNING RADIUS | Same as original vehicle |
| APPROACH ANGLE* | Up to 90 |
| DEPARTURE ANGLE* | Up to 80 |
| GRADE CAPACITY* | 100% |
| SIDE SLOPE CAPACITY | 68% |
| MAXIMUM OPERATING SIDE SLOPE (Grade)* | 25% |
| TERRAIN - ALL TERRAIN INCLUDING HARD SURFACE | @ 21,000 lbs. (9,525 kg) GVW |
| MAXIMUM DISTANCE OFF ROAD | Indefinite |
| MAXIMUM DISTANCE HARD SURFACE** | @ Below 80°F (26°C) slower speeds and light GVW: indefinite |
| @ Above 80°F (26°C) and light GVW: 15 miles @ 40 mph (64 km/h) | |
| @ Above 80°F (26°C) @ GVW: 5 mile @ 40 mph (64 km/h) | |
| NOTE: Some trimming of vehicle body parts may be required. Requires additional time and complexity for installation compared to standard Mattracks Models. Vehicles may require optional Steering Assist kit or upgraded power steering. | |
| *Depending on vehicle | **For maximum tread life | ***Some vehicles may require slight alterations | |
| ALL SPECIFICATIONS ARE APPROXIMATE, YOUR VEHICLE'S PERFORMANCE MAY DIFFER. WE RESERVE THE RIGHT TO MAKE CHANGES OR MODIFICATIONS WITHOUT NOTIFICATION | |